Cisco Nexus 3000 series - Page 247

Send comments to nexus3k-docfeedback@cisco.com
-SM-223
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging onboard
• Timestamp when OBFL data is manually cleared.
This example shows how to display the OBFL kernel stack trace information:
switch# show logging onboard stack-trace
The show logging onboard stack-trace command displays the following information:
• Time in seconds
• Time in microseconds
• Error description string
• Current process name and identification
• Kernel jiffies
• Stack trace
Related Commands Command Description
clear logging onboard Clears the OBFL entries in the persistent log.
hw-module logging
onboard
Enables or disabled OBFL entries based on the error type.