Send comments to nexus3k-docfeedback@cisco.com
-SM-283
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp host
show snmp host
To display the Simple Network Management Protocol (SNMP) host information, use the show snmp
host command.
show snmp host
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SNMP host:
switch# show snmp host
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
snmp-server host Configures an SNMP host.
To Next Page
Loading...
