Cisco Nexus 3000 series - Show Startup-Config Eem

Send comments to nexus3k-docfeedback@cisco.com
-SM-289
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show startup-config eem
show startup-config eem
To display information about the startup configuration for the Embedded Event Manager (EEM), use the
show startup-config eem command.
show startup-config eem
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the startup configuration for EEM:
switch# show startup-config eem
!Command: show startup-config eem
!Time: Thu Feb 23 02:05:51 2012
!Startup config saved at: Wed Feb 22 20:55:47 2012
version 5.0(3)U5(1)
switch#
Related Commands
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
show event manager
environment
Displays information about the configured environment variables.
show event manager
event-types
Displays information about the event manager event types.
show event manager
history events
Displays the history of events for all policies.
show event manager
policy-state
Displays information about a system policy.
show event manager
script system
Displays information about the script policies.