Cisco Nexus 3000 series - Abort (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-21
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter New and Changed Information
Call Home This feature was introduced.
You can configure the Cisco Smart Call
Home service and parameters on a Cisco
NX-OS switch.
5.0(3)U1(1) abort (Call Home)
alert-group (Call Home)
callhome
callhome send diagnostic
callhome test
commit (Call Home)
contract-id (Call Home)
customer-id (Call Home)
destination-profile (Call Home)
duplicate-message throttle (Call
Home)
email-contact (Call Home)
enable (Call Home)
ntp trusted-key
phone-contact (Call Home)
show callhome
show callhome destination-profile
show callhome transport-email
show callhome user-def-cmds
show running-config callhome
show startup-config callhome
show tech-support callhome
site-id (Call Home)
streetaddress (Call Home)
switch-priority (Call Home)
transport email (Call Home)
Table 1 New and Changed Information
Feature Description
Changed in
Release Where Documented