Cisco Nexus 3000 series - Page 26

Send comments to nexus3k-docfeedback@cisco.com
-SM-2
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
abort (Call Home)
abort (Call Home)
To discard Call Home configuration changes and release the Cisco Fabric Services (CFS) lock, use the
abort command.
abort
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Callhome configuration mode
Command History
Usage Guidelines Use this command if you are the CFS lock owner or if you are logged into the device that holds the CFS
lock.
Examples This example shows how to discard Call Home configuration changes:
switch(config-callhome)# abort
switch(config-callhome)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show callhome Displays Call Home configuration information.
show running-config
callhome
Displays the running configuration information for Call Home.