Cisco Nexus 3000 series - Page 27

Send comments to nexus3k-docfeedback@cisco.com
-SM-3
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
abort (session)
abort (session)
To discard the current configuration session, use the abort command.
abort
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Session configuration mode
Command History
Examples This example shows how to abort the current configuration session:
switch# configure session MySession1
switch(config-s)# abort
switch#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
commit Commits a session.
configure session Creates a configuration session.
show configuration
session
Displays the contents of the session.
verify Verifies a session.