Cisco Nexus 3000 series - Show Ntp Pending-Diff

Send comments to nexus3k-docfeedback@cisco.com
-SM-241
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp pending-diff
show ntp pending-diff
To display the differences between the pending Network Time Protocol (NTP) configuration and the
active NTP configuration, use the show ntp pending-diff command.
show ntp pending-diff
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the differences between the pending NTP configuration and the
active NTP configuration:
switch# show ntp pending-diff
switch#
Related Commands
Release Modification
6.0(2)U(2)1 This command was introduced.
Command Description
show ntp source Displays information about the NTP source.
show ntp peers Displays information about NTP peers.