Cisco Nexus 3000 series - Streetaddress (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-SM-323
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
streetaddress (Call Home)
streetaddress (Call Home)
To configure the street address for the primary person responsible for the switch, use the streetaddress
command. To remove the street address, use the no form of this command.
streetaddress address
no streetaddress
Syntax Description
Command Default None
Command Modes Callhome configuration mode
Command History
Examples This example shows how to configure the street address for the primary person responsible for the
switch:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# streetaddress 170 West Tasman Drive, San Jose, CA 95134-1706
switch(config-callhome)#
Related Commands
address Street address. The address can be a maximum of 255 alphanumeric
characters and can include white spaces.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
contract-id Configures the contract number for the switch.
copy running-config
startup-config
Saves this configuration change.
show callhome Displays a summary of the Call Home configuration.