Send comments to nexus3k-docfeedback@cisco.com
-SM-218
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging monitor
show logging monitor
To display the monitor logging configuration, use the show logging monitor command.
show logging monitor
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the monitor logging configuration:
switch# show logging monitor
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging monitor Configures logging on the monitor.
To Next Page
Loading...
