Cisco Nexus 3000 series - Verify (Session)

Send comments to nexus3k-docfeedback@cisco.com
-SM-331
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
verify (session)
verify (session)
To verify the current configuration session, use the verify command.
verify
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Session configuration mode
Command History
Examples This example shows how to verify a session:
switch# configure session MySession
switch(config-s)# verify
Failed to start Verification: Session Database already locked, Verify/Commit in
Progress.
switch(config-s)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
commit Commits a session.
configure session Creates a configuration session.
show configuration
session
Displays the contents of the session.