Cisco Nexus 3000 series - Show Logging Status

Send comments to nexus3k-docfeedback@cisco.com
-SM-228
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging status
show logging status
To display the logging status, use the show logging status command.
show logging status
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the logging status:
switch# show logging status
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging distribute Enables the distribution of the syslog server configuration to network
switches using the Cisco Fabric Services (CFS) infrastructure.