Cisco Nexus 3000 series - Show Ptp Corrections

Send comments to nexus3k-docfeedback@cisco.com
-SM-255
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ptp corrections
show ptp corrections
To display the history of the Precision Time Protocol (PTP) clock corrections on the Ethernet interfaces,
use the show ptp corrections command.
show ptp corrections
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the history of the PTP clock corrections on the Ethernet interfaces:
switch# show ptp corrections
Related Commands
Release Modification
5.0(3)U2(2) This command was introduced.
Command Description
show ptp brief Displays the PTP status.
show ptp clock Displays the properties of the local clock.
show ptp clock
foreign-masters-record
Displays the state of foreign masters known to the PTP process.
show ptp parent Displays the properties of the PTP parent.
show ptp port Displays the status of the PTP port.
show ptp time-property Displays the properties of the PTP clock.