Cisco Nexus 3000 series - Snmp-Server Enable Traps

Send comments to nexus3k-docfeedback@cisco.com
-SM-303
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
snmp-server enable traps
snmp-server enable traps
To enable the Simple Network Management Protocol (SNMP) notifications, use the snmp-server enable
traps command. To disable SNMP notifications, use the no form of this command.
snmp-server enable traps [aaa [server-state-change] | callhome [event-notify | smtp-send-fail] |
entity {entity_fan_status_change | entity_mib_change | entity_module_inserted |
entity_module_removed | entity_module_status_change | entity_power_out_change |
entity_power_status_change | entity_unrecognised_module} | fcdomain | fcns | fcs | fctrace
| fspf | license [notify-license-expiry | notify-license-expiry-warning |
notify-licensefile-missing | notify-no-license-for-feature] | link | rf
[redundancy_framework] | rmon [fallingAlarm | hcFallingAlarm | hcRisingAlarm |
risingAlarm] | rscn | snmp [authentication] | storm-control [trap-rate val] | vsan | zone
[default-zone-behavior-change | merge-failure | merge-success | request-reject1 |
unsupp-mem]]
no snmp-server enable traps [aaa
[server-state-change] | callhome [event-notify |
smtp-send-fail] | entity {entity_fan_status_change | entity_mib_change |
entity_module_inserted | entity_module_removed | entity_module_status_change |
entity_power_out_change | entity_power_status_change | entity_unrecognised_module} |
fcdomain | fcns | fcs | fctrace | fspf | license [notify-license-expiry |
notify-license-expiry-warning | notify-licensefile-missing | notify-no-license-for-feature] |
link | rf [redundancy_framework] | rmon [fallingAlarm | hcFallingAlarm | hcRisingAlarm
| risingAlarm] | rscn | snmp [authentication] | storm-control [trap-rate] | vsan | zone
[default-zone-behavior-change | merge-failure | merge-success | request-reject1 |
unsupp-mem]]
Syntax Description aaa (Optional) Enables notifications for a AAA server state change.
server-state-change (Optional) Specifies the AAA server state change.
callhome (Optional) Enables Cisco Call Home notifications.
event-notify (Optional) Specifies the Cisco Call Home external event
notification.
smtp-send-fail (Optional) Specifies the SMTP message send fail notification.
entity (Optional) Enables notifications for a change in the module status,
fan status, or power status.
entity_fan_status_change (Optional) Specifies the entity fan status change.
entity_mib_change (Optional) Specifies the entity MIB change.
entity_module_inserted (Optional) Specifies the entity module inserted.
entity_module_removed (Optional) Specifies the entity module removed.
entity_module_status_change (Optional) Specifies the entity module status change.
entity_power_out_change (Optional) Specifies the entity power out change.
entity_power_status_change (Optional) Specifies the entity power status change.
entity_unrecognised_module (Optional) Specifies the entity unrecognized module.
fcdomain (Optional) Enables notifications for the Fibre Channel domain.
fcns (Optional) Enables notifications for the name server.
fcs (Optional) Enables notifications for the fabric configuration server.