Cisco Nexus 3000 series - Terminal Event-Manager Bypass

Send comments to nexus3k-docfeedback@cisco.com
-SM-328
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
terminal event-manager bypass
terminal event-manager bypass
To specify the command-line interface (CLI) events that match the Embedded Event Manager (EEM)
policies to bypass the EEM events, use the terminal event-manager bypass command.
terminal event-manager bypass
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Global configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to specify the command-line interface (CLI) events that match the Embedded
Event Manager (EEM) policies to bypass the EEM events:
switch# configure terminal
switch(config)# terminal event-manager bypass
switch(config)#
Related Commands
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
action event-default Specifies that the default action for the event is to be performed when an
EEM applet is triggered.