Cisco Nexus 3000 series - Page 351

Send comments to nexus3k-docfeedback@cisco.com
-SM-327
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
tag
tag
To correlate multiple events in the policy, use the tag command.
tag tag {and | andnot | or} tag [and | andnot | or {tag}]{happens occurs in seconds}
Syntax Descriptiona
Defaults None
Command Modes Applet configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to correlate multiple events in the policy:
switch# configuration terminal
switch(config)# event manager applet monitorShutdown
switch(config-applet)# description "Monitors interface shutdown."
switch(config-applet)# event cli match "shutdown"
switch(config-applet)# tag one or two happens 1 in 10000
switch(config-applet)# action 1.0 cli show interface ethernet 3/1
Related Commands
tag Tag name. The tag name can be any alphanumeric string up to 29 characters.
and (Optional) Specifies to use boolean and logic.
andnot (Optional) Specifies to use boolean andnot logic.
or (Optional) Specifies to use boolean or logic.
happens Specifies the number of occurrences before raising the event.
occurs Number of times that the event occurs. The range is from 1 to 4294967295.
in Specifies the number of occurrences that must occur within this time period.
seconds Time in seconds that the next event occurs. The range is from 0 to
4294967295 seconds.
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
description Configures a descriptive string for the policy.
event Configures the event statement for the policy.
show event-manager
policy state
Displays information about the status of the configured policy.