Cisco Nexus 3000 series - Show Ntp Statistics

Send comments to nexus3k-docfeedback@cisco.com
-SM-247
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp statistics
show ntp statistics
To display Network Time Protocol (NTP) statistics, use the show ntp statistics command.
show ntp statistics {io | local | memory | peer {ipaddr address | name name1 [..nameN]}
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the statistics for NTP:
switch# show ntp statistics local
Related Commands
io Displays the input-output statistics.
local Displays the counters maintained by the local NTP.
memory Displays the statistics counters related to the memory code.
peer Displays the per-peer statistics counter of a peer.
ipaddr address Displays statistics for the peer with the configured IPv4 or IPv6 address. The
IPv4 address format is dotted decimal, x.x.x.x. The IPv6 address format is
hexadecimal A:B::C:D.
name name1 Displays statistics for a named peer.
..nameN (Optional) Displays statistics for one or more named peers.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
clear ntp statistics Clears NTP statistics