Send comments to nexus3k-docfeedback@cisco.com
-SM-281
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp engineID
show snmp engineID
To display the identification of the local Simple Network Management Protocol (SNMP) engine, use the
show snmp engineID command.
show snmp engineID
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines An SNMP engine is a copy of SNMP that can reside on a local or remote device. SNMP passwords are
localized using the SNMP engine ID of the authoritative SNMP engine.
Examples This example shows how to display the SNMP engine ID:
switch# show snmp engineID
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show running-config Displays the running system configuration information.
snmp-server user Configures a new user to a SNMP group.
To Next Page
Loading...
