Cisco Nexus 3000 series - Show Running-Config

Send comments to nexus3k-docfeedback@cisco.com
-SM-263
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show running-config
show running-config
To display the contents of the currently running configuration file, use the show running-config
command.
show running-config [all]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information on the running configuration on a switch that runs Cisco
NX-OS Release 5.0(3)U1(1):
switch# show running-config
!Command: show running-config
!Time: Fri May 28 10:30:02 2010
version 5.0(3)U1(1)
feature telnet
feature private-vlan
username adminbackup password 5 ! role network-operator
username admin password 5 $1$gLP0Z4.z$nA4fMnTcHmdSgQ3ENakm/1 role network-admin
ip domain-lookup
hostname switch
slot 1
snmp-server user admin network-admin auth md5 0xd727e3e4ed39de2f32841ffa24e4234c
priv 0xd727e3e4ed39de2f32841ffa24e4234c localizedkey
vrf context management
ip route 0.0.0.0/0 192.168.0.1
<--Output truncated-->
switch#
This example shows how to display detailed information on the running configuration on a switch that
runs Cisco NX-OS Release 5.0(3)U1(1):
switch# show running-config all
all (Optional) Displays the full operating information including default settings.
Release Modification
5.0(3)U1(1) This command was introduced.