Cisco Nexus 3000 series - Clear Sflow Statistics

Send comments to nexus3k-docfeedback@cisco.com
-SM-35
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
clear sflow statistics
clear sflow statistics
To clear the sFlow statistics, use the clear sflow statistics command.
clear sflow statistics
Note Beginning in Release 7.0(3)I2(1), the Total Samples and Total Samples fields are not cleared.
To clear Total Samples: clear hardware rate-limiter sflow
To clear Total Packets: clear hardware rate-limiter sflow
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Global configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how clear the sFlow statistics:
switch# configure terminal
switch(config)# clear sflow statistics
switch(config)#
Related Commands
Release Modification
5.0(3)U4(1) This command was introduced.
7.0(3)I2(1) The Total Samples and Total Samples fields are not cleared.
Command Description
show sflow Displays the sFlow configuration.