Cisco Nexus 3000 series - Show Logging Last

Send comments to nexus3k-docfeedback@cisco.com
-SM-213
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging last
show logging last
To display the last number of lines of the logfile, use the show logging last command.
show logging last number
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the last 42 lines of the log file:
switch# show logging last 42
Related Commands
number Enters the number of lines to display from 1 to 9999.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging logfile Configures the name of the log file used to store system messages.