Cisco Nexus 3000 series - Show Startup-Config Callhome

Send comments to nexus3k-docfeedback@cisco.com
-SM-288
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show startup-config callhome
show startup-config callhome
To display the startup configuration for Call Home, use the show startup-config callhome command.
show startup-config callhome
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the startup configuration for Call Home:
switch# show startup-config callhome
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
copy running-config
startup-config
Saves this configuration change.
show callhome Displays Call Home configuration information.
show running-config
callhome
Displays the running configuration information for Call Home.