Cisco Nexus 3000 series - Ntp Sync-Retry

Send comments to nexus3k-docfeedback@cisco.com
-SM-152
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ntp sync-retry
ntp sync-retry
To retry synchronization with the configured Network Time Protocol (NTP) servers, use the ntp
sync-retry command.
ntp sync-retry
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to retry synchronization with the configured NTP servers:
switch# ntp sync-retry
switch#
Related Commands
Release Modification
6.0(2)U2(1) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.