Cisco Nexus 3000 series - Show Ntp Peers

Send comments to nexus3k-docfeedback@cisco.com
-SM-239
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp peers
show ntp peers
To display information about Network Time Protocol (NTP) peers, use the show ntp peers command.
show ntp peers
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information about NTP peers:
switch# show ntp peers
Related Commands
Release Modification
6.0(2)U2(1) This command was introduced.
Command Description
show ntp peer-status Displays status information about NTP peers.