Cisco Nexus 3000 series - Mpls Strip Dest-Mac

Send comments to nexus3k-docfeedback@cisco.com
-SM-122
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
mpls strip dest-mac
mpls strip dest-mac
To configure the destination MAC address for stripped egress frames, use the mpls strip dest-mac
command. To delete the configured destination MAC address, use the no form of this command.
mpls strip dest-mac mac-address
no mpls strip dest-mac mac-address
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
Examples This example shows how to configure the destination MAC address for egress frames:
switch# configure terminal
switch(config)# mpls strip dest-mac 1.1.1
Related Commands
mac-address Specifies the destination MAC address for egress frames that are stripped of
their headers.
The MAC address can be specified in one of the following four forms:
• E.E.E
• EE-EE-EE-EE-EE-EE
• EE:EE:EE:EE:EE:EE
• EEEE.EEEE.EEEE
Release Modification
6.0(2)U2(5) This command was introduced.
Command Description
mpls strip Enables the MPLS stripping feature.
clear mpls strip label
dynamic
Clears dynamic label entries.
mpls strip label Adds or deletes static MPLS labels.
mpls strip label-age Configures MPLS label aging.
show mpls strip labels Displays MPLS label configuration.