Cisco Nexus 3000 series - Show Event Manager Script System

Send comments to nexus3k-docfeedback@cisco.com
-SM-204
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show event manager script system
show event manager script system
To display information about the script policies, use the show event manager script system command.
show event manager script system policy-name | all
Syntax Description
Defaults None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the script policies:
switch# show event manager script system all
switch#
Related Commands
policy-name Name of the system script policy.
all Displays all the available system script policies.
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
show event manager
environment
Displays information about the configured environment variables.
show event manager
event-types
Displays information about the event manager event types.
show event manager
history events
Displays the history of events for all policies.
show event manager
policy-state
Displays information about a system policy.
show running-config
eem
Displays information about the running configuration for the Embedded
Event Manager (EEM).
show event manager
system-policy
Displays information about the predefined system policies.
show startup-config
eem
Displays information about the startup configuration for the Embedded
Event Manager (EEM).