Cisco Nexus 3000 series - Show Snmp Trap

Send comments to nexus3k-docfeedback@cisco.com
-SM-285
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp trap
show snmp trap
To display the Simple Network Management Protocol (SNMP) link trap generation information, use the
show snmp trap command.
show snmp trap
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SNMP traps:
switch# show snmp trap
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
snmp trap link-status Enables SNMP link trap generation.