Cisco Nexus 3000 series - Event Manager Applet

Send comments to nexus3k-docfeedback@cisco.com
-SM-59
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
event manager applet
event manager applet
To register an applet with the Embedded Event Manager (EEM) and enter the applet configuration mode,
use the event manager applet command. To remove the applet configuration, use the no form of this
command.
event manager applet applet-name
no event manager applet applet-name
Syntax Descriptiona
Defaults None
Command Modes Applet configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to register an applet and enter the applet configuration mode:
switch# configure terminal
switch(config)# event manager applet monitorShutdown
switch(config-applet)#
This example shows how to remove the applet configuration:
switch(config-applet)# no event manager applet monitorShutdown
switch(config-applet)#
Related Commands
applet-name Name of the applet. The applet name can be any case-sensitive,
alphanumeric string up to 29 characters. The applet name cannot have an
underscore in the first two characters.
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
description Configures a descriptive string for the policy.
event Configures the event statement for the policy.
show event-manager
policy state
Correlates multiple events in the policy.
tag Displays information about the status of the configured policy.