Cisco Nexus 3000 series - Callhome

Send comments to nexus3k-docfeedback@cisco.com
-SM-19
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
alert-group (Call Home)
Note You cannot add user-defined CLI show commands to the CiscoTAC-1 destination profile.
You can add show commands only to full text and XML destination profiles. Short text destination
profiles do not support additional show commands because they only allow 128 bytes of text.
Examples This example shows how to add a show command output to a Call Home message sent for an alert group:
switch(config-callhome)# alert-group configuration user-def-cmd “show running-config”
switch(config-callhome)#
Related Commands Command Description
copy running-config
startup-config
Saves this configuration change.
show callhome
user-def-cmd
Displays information about all user-defined show commands added to alert
groups.