Cisco Nexus 3000 series - Page 44

Send comments to nexus3k-docfeedback@cisco.com
-SM-20
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
callhome
callhome
To configure the Cisco Smart Call Home service and enter the callhome configuration mode, use the
callhome command.
callhome
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Global configuration mode
Command History
Usage Guidelines You must configure the e-mail, phone, and street address information for Call Home. You can optionally
configure the contract ID, customer ID, site ID, and switch priority information.
Examples This example shows how to enter callhome configuration mode:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
email-contact Configures the e-mail address.
show callhome Displays a summary of the Call Home configuration.
snmp-server contact Configures the SNMP contact (sysContact).