Cisco Nexus 3000 series - Ntp Commit

Send comments to nexus3k-docfeedback@cisco.com
-SM-137
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ntp commit
ntp commit
To apply the pending configuration pertaining to the Network Time Protocol (NTP) distribution session
in progress, use the ntp commit command.
ntp commit
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Global configuration mode
Command History
Examples This example shows how to commit changes to the active NTP configuration:
switch# configure terminal
switch(config)# ntp commit
switch(config)#
Related Commands
Release Modification
6.0(2)U2(1) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.