Cisco Nexus 3000 series - Show Ntp Access-Groups

Send comments to nexus3k-docfeedback@cisco.com
-SM-235
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp access-groups
show ntp access-groups
To display the Network Time Protocol (NTP) access group configuration, use the show ntp
access-groups command.
show ntp access-groups
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP access group configuration:
switch# show ntp access-groups
--------------------------------------
Access List Type
--------------------------------------
Admin_Group_123 Peer
switch#
Related Commands
Release Modification
6.0(2)U(2)1 This command was introduced.
Command Description
ntp access-group peer Configures an NTP access group.