Cisco Nexus 3000 series - Show Snmp Sessions

Send comments to nexus3k-docfeedback@cisco.com
-SM-284
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp sessions
show snmp sessions
To display the current Simple Network Management Protocol (SNMP) sessions, use the show snmp
sessions command.
show snmp sessions
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SNMP sessions:
switch# show snmp sessions
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show running-config Displays the running system configuration information.