Cisco Nexus 3000 series - Commit (Session)

Send comments to nexus3k-docfeedback@cisco.com
-SM-38
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
commit (session)
commit (session)
To commit the current configuration session, use the commit command.
commit
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Session configuration mode
Command History
Examples This example shows how to commit the current session:
switch# configure session MySession
switch(config-s)# commit
switch(config-s)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
configure session Creates a configuration session.
show configuration
session
Displays the contents of the session.
verify Verifies a session.