Send comments to nexus3k-docfeedback@cisco.com
-SM-279
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp community
show snmp community
To display the Simple Network Management Protocol (SNMP) community strings configured on the
switch, use the show snmp community command.
show snmp community
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SNMP community strings:
switch# show snmp community
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
snmp-server
community
Configures the community access string to permit access to the SNMP
protocol.
To Next Page
Loading...
