Cisco Nexus 3000 series - Show Ntp Logging-Status

Send comments to nexus3k-docfeedback@cisco.com
-SM-238
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp logging-status
show ntp logging-status
To display the Network Time Protocol (NTP) logging status, use the show ntp logging-status command.
show ntp logging-status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP logging status:
switch# show ntp logging-status
NTP logging enabled.
switch#
Related Commands
Release Modification
6.0(2)U(1) This command was introduced.
Command Description
ntp logging Enables NTP logging.
show ntp authentica-
tion-status
Displays the status of NTP authentication.
show ntp session status Displays the NTP distribution session information.