Cisco Nexus 3000 series - Page 20

Send comments to nexus3k-docfeedback@cisco.com
-20
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter New and Changed Information
40-Gigabit Ethernet Quad
small form-factor
pluggable (QSFP+) port
This feature was introduced to support
40-Gigabit Ethernet on QSFP+ ports.
The following command was added in this
release:
• hardware profile portmode
5.0(3)U2(1) filter access-group
Domain Name System
(DNS)
This feature was introduced.
You can configure a DNS host, server, or
name and enable the DNS lookup feature.
5.0(3)U1(1) ip domain-list
ip domain-lookup
ip domain-name
ip host
ip name-server
show hardware forwarding memory
health summary
Network Time Protocol
(NTP)
This feature was introduced.
You can configure NTP peers and servers.
5.0(3)U1(1) mpls strip dest-mac
ntp abort
ntp access-group
ntp disable
ntp logging
show mpls strip labels
show ntp pending-diff
show ntp pending-diff
show ntp status
Table 1 New and Changed Information
Feature Description
Changed in
Release Where Documented