Cisco Nexus 3000 series - Page 41

Send comments to nexus3k-docfeedback@cisco.com
-SM-17
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
action syslog
Examples This example shows how to configure a syslog message to save when an EEM applet is triggered:
switch# configure terminal
switch(config)# event manager applet syslog-applet
switch(config-applet)# action 1.7 syslog priority critical msg cpu usage high
switch(config-applet)#
Related Commands Command Description
action cli Configures a virtual shell (VSH) command string to be executed when an
Embedded Event Manager (EEM) applet is triggered.
action counter set or modify a named counter when an Embedded Event Manager (EEM)
applet is triggered.
action event-default Specifies that the default action for the event is to be performed when an
Embedded Event Manager (EEM) applet is triggered.
action policy-default Enables the default action of the policy being overridden.
action reload Specifies the action of reloading the Cisco Nexus 3000 Series software
when an Embedded Event Manager (EEM) applet is triggered.
action snmp-trap Specifies the generation of a Simple Network Management Protocol
(SNMP) trap when an Embedded Event Manager (EEM) applet is triggered.