Send comments to nexus3k-docfeedback@cisco.com
-SM-56
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
event counter
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to specify an event criteria for an EEM applet that is run when the defined
critical_errors counter exceeds the entry value:
switch# configure terminal
switch(config)# event manager applet eventcntr-applet
switch(config-applet)# event counter name critical_errors entry-val 3 entry-op gt
switch(config-applet)#
Release Modification
5.0(3)U3(1) This command was introduced.
To Next Page
Loading...
