Send comments to nexus3k-docfeedback@cisco.com
-SM-68
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
event snmp
Examples This example shows how to specify the event criteria for an EEM applet that is run by sampling SNMP
object identifier values:
switch# configure terminal
switch(config)# event manager applet snmp-applet
switch(config-applet)# event snmp oid 4.2.1.6 get-type next entry-op eq entry-val 42
poll-interval 30000
switch(config-applet)#
To Next Page
Loading...
