D-Link xStack DGS-3120 Series - Page 1014

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1009
104-2 delete ipmroute
Description
This command is used to delete static multicast route entries on the switch.
Format
delete ipmroute [<network_address> | all]
Parameters
<network_address> - Specify the network address of the static multicast route entry.
all - Specify to delete all static multicast route entries.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a static multicast route entry:
DGS-3120-24TC:admin#delete ipmroute 11.0.0.0/8
Command: delete ipmroute 11.0.0.0/8
Success.
DGS-3120-24TC:admin#
104-3 show ipmroute
Description
This command is used to display static multicast route entries on the Switch.
Format
show ipmroute {<network_address>}
Parameters
<network_address> - (Optional) Specify the network address of the static multicast route entry.
Restrictions
None.
Example
To display all static multicast route entries: