D-Link xStack DGS-3120 Series - Config Authen Application

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
73
Format
show authen_enable [default | method_list_name <string 15> | all]
Parameters
default - Display default user-defined method list for promoting user's privilege to Admin level.
method_list_name - Display the specific user-defined method list for promoting user's privilege
to Admin level.
<string 15> - Enter the method list name here. This value can be up to 15 characters long.
all - Display all method lists for promoting user's privilege to Admin level.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all method lists for promoting user's privilege to Admin level:
DGS-3120-24TC:admin#show authen_enable method_list_name enable_list_1
Command: show authen_enable method_list_name enable_list_1
Method List Name Priority Method Name Comment
---------------- -------- --------------- ------------------
enable_list_1 1 local_enable Keyword
DGS-3120-24TC:admin#
5-16 config authen application
Description
This command is used to configure login or enable method list for all or the specified application.
Format
config authen application [console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
Parameters
console - Application: console.
telnet - Application: telnet.
ssh - Application: SSH.
http - Application: web.
all - Application: console, telnet, SSH, and web.
login - Select the method list of authentication methods for user login.
enable - Select the method list of authentication methods for promoting user's privilege to Admin
level.
default - Default method list.
method_list_name - The user-defined method list name.
<string> - Enter the method list name here. This value can be up to 15 characters long.