D-Link xStack DGS-3120 Series - Debug Stp Show Counter

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
655
1:3 Brief Brief Brief
1:4 Brief Brief Brief
1:5 Brief Brief Brief
1:6 Brief Brief Brief
1:7 Brief Brief Brief
1:8 Brief Brief Brief
1:9 Brief Brief Brief
1:10 Brief Brief Brief
1:11 Brief Brief Brief
1:12 Brief Brief Brief
1:13 Brief Brief Brief
1:14 Brief Brief Brief
1:15 Brief Brief Brief
1:16 Brief Brief Brief
1:17 Brief Brief Brief
1:18 Brief Brief Brief
1:19 Brief Brief Brief
1:20 Brief Brief Brief
1:21 Brief Brief Brief
1:22 Brief Brief Brief
1:23 Brief Brief Brief
1:24 Brief Brief Brief
DGS-3120-24TC:admin#
64-4 debug stp show counter
Description
This command is used to display the STP counters.
Format
debug stp show counter {ports [<portlist> | all]}
Parameters
ports - (Optional) Specify the STP ports for display.
<portlist> - Enter the list of port used for this configuration here.
all - Display all port’s counters.
If no parameter is specified, display the global counters.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the STP counters for port 9: