D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
571
Unknown TLV type : 31
Unknown TLV Information Bytes : XX XX XX XX XX XX(hex)
DGS-3120-24TC:admin#
53-12 show lldp statistics
Description
This command is used to display an overview of neighbor detection activity on the Switch.
Format
show lldp statistics
Parameters
None.
Restrictions
None.
Example
To display global statistics information:
DGS-3120-24TC:admin# show lldp statistics
Command: show lldp statistics
Last Change Time : 6094
Number of Table Insert : 1
Number of Table Delete : 0
Number of Table Drop : 0
Number of Table Ageout : 0
DGS-3120-24TC:admin#
53-13 show lldp statistics ports
Description
This command is used to display per-port LLDP statistics
Format
show lldp statistics ports {<portlist>}
Parameters
<portlist> - (Optional) Specified a range of ports to be configured. When port list is not specified,

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)