D-Link xStack DGS-3120 Series - Create Snmp View

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
970
DGS-3120-24TC:admin# show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name : public
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Securiy Model : SNMPv1
Securiy Level : NoAuthNoPriv
Group Name : public
ReadView Name : CommunityView
WriteView Name :
Notify View Name : CommunityView
Securiy Model : SNMPv2
Securiy Level : NoAuthNoPriv
Group Name : initial
ReadView Name : restricted
WriteView Name :
Notify View Name : restricted
Securiy Model : SNMPv3
Securiy Level : NoAuthNoPriv
Group Name : WriteGroup
ReadView Name : CommunityView
WriteView Name : CommunityView
Notify View Name : CommunityView
Securiy Model : SNMPv2
Securiy Level : NoAuthNoPriv
Total Entries: 10
DGS-3120-24TC:admin#
101-11 create snmp view
Description
This command is used to assign views to community strings to limit which MIB objects an SNMP
manager can access.
Format
create snmp view <view_name 32> <oid> view_type [included | excluded]
Parameters
view - View name to be created.
<view_name 32> - Enter the view name here. The name can be up to 32 characters long.