xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
1117
Appendix B
System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in
the System Log of this Switch.
Category Event Description Log Information Severity Remarks
System System started up
[Unit <unitID>,] System started
Critical
System warm start
[Unit <unitID>,] System warm
[Unit <unitID>,] System cold start
[Unit <unitID>,] Configuration
saved to flash by
console(Username:
<username>, IP: <ipaddr> )
"IP: <ipaddr>" are
XOR shown in log
string, which
means if user login
by console, there
will no IP
information for
logging.
System log saved to flash
[Unit <unitID>,] System log
saved to flash by
console(Username:
<username>, IP: <ipaddr> )
Informational
"IP: <ipaddr>" are
XOR shown in log
string, which
means if user login
by console, there
will no IP
information for
[Unit <unitID>,] Configuration
and log saved to flash by
console(Username:
<username>, IP: <ipaddr> )
"IP: <ipaddr>" are
XOR shown in log
string, which
means if user login
by console, there
will no IP
information for
[Unit <unitID>,] Internal Power
failed
Internal Power is
recovered
[Unit <unitID>,] Internal Power is
recovered
[Unit <unitID>,] Redundant
Power failed
Redundant Power is
working
[Unit <unitID>,] Redundant
Power is working
Side Fan failed [Unit <unitID>,] Side Fan failed Critical
[Unit <unitID>,] Firmware
upgraded by console
successfully (Username:
<username>, IP: <ipaddr> )
"IP: <ipaddr>" are
XOR shown in log
string, which
means if user login
by console, there
will no IP
information for
logging.
Firmware upgrade was
unsuccessful
[Unit <unitID>,] Firmware
upgrade by console was
unsuccessful! (Username:
<username>, IP: <ipaddr> )
Warning
"by console" and
"IP: <ipaddr>" are
XOR shown in log
string, which
means if user login
by console, there
will no IP
information for