D-Link xStack DGS-3120 Series

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
923
DGS-3120-24TC:admin#enable stp
Command: enable stp
Success.
DGS-3120-24TC:admin#
96-2 disable stp
Description
This command is used to disable STP globally.
Format
disable stp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable STP:
DGS-3120-24TC:admin#disable stp
Command: disable stp
Success.
DGS-3120-24TC:admin#
96-3 config stp
Description
This command is used to configure the bridge parameters global settings.
Format
config stp {maxage <value 6-40> | maxhops <value 6-40> | hellotime <value 1-2> |
forwarddelay <value 4-30> | txholdcount <value 1-10> | fbpdu [enable | disable] |
nni_bpdu_addr [dot1d | dot1ad]}
Parameters
maxage - (Optional) Used to determine if a BPDU is valid. The default value is 20.