D-Link xStack DGS-3120 Series - Disable Authorization Attributes; Show Authorization

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
189
DGS-3120-24TC:admin# enable authorization attributes
Command: enable authorization attributes
Success.
DGS-3120-24TC:admin#
16-9 disable authorization attributes
Description
This command is used to disable authorization.
Format
disable authorization attributes
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
This example sets authorization global state disabled:
DGS-3120-24TC:admin# disable authorization attributes
Command: disable authorization attributes
Success.
DGS-3120-24TC:admin#
16-10 show authorization
Description
This command is used to display authorization status.
Format
show authorization
Parameters
None.