D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
825
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
The example is to assign VLAN marketing-1 for untaged ipv6 packet ingress from port 3.
To configure the group ID 10 on port 3 to be associated with VLAN marketing-1:
DGS-3120-24TC:admin#config port dot1v ports 1:3 add protocol_group group_id 10
vlan marketing-1
Command: config port dot1v ports 1:3 add protocol_group group_id 10 vlan
marketing-1
Success.
DGS-3120-24TC:admin#
82-6 show port dot1v
Description
This command is used to display the VLAN to be associated with untagged packet ingressed from
a port based on the protocol group.
Format
show port dot1v {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Enter a list of ports used for the configuration here.
If not port is specified, information for all ports will be displayed.
Restrictions
None.
Example
The example display the protocol VLAN information for ports 1:

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English