EasyManua.ls Logo

D-Link xStack DGS-3120 Series - Chapter 23 Denial-Of-Service (Dos) Attack Prevention Command List

D-Link xStack DGS-3120 Series
1150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
286
Chapter 23
Denial-of-Service (DoS)
Attack Prevention
Command List
config dos_prevention dos_type [{land_attack | blat_attack | tcp_null_scan | tcp_xmasscan |
tcp_synfin | tcp_syn_srcport_less_1024 | ping_death_attack | tcp_tiny_frag_attack}(1) | all]
{action [drop] | state [enable | disable]}(1)
show dos_prevention {land_attack | blat_attack | tcp_null_scan | tcp_xmasscan | tcp_synfin |
tcp_syn_srcport_less_1024 | ping_death_attack | tcp_tiny_frag_attack}
config dos_prevention trap [enable | disable]
config dos_prevention log [enable | disable]
23-1 config dos_prevention dos_type
Description
This command is used to prevent the DoS attack from specific ports.
Format
config dos_prevention dos_type [{land_attack | blat_attack | tcp_null_scan | tcp_xmasscan
| tcp_synfin | tcp_syn_srcport_less_1024 | ping_death_attack | tcp_tiny_frag_attack}(1) | all]
{action [drop] | state [enable | disable]}(1)
Parameters
land_attack - Specify the type of DoS attack as land attack.
blat_attack - Specify the type of DoS attack as blat attack.
tcp_null_scan - Specify the type of DoS attack as TCP null scan.
tcp_xmasscan - Specify the type of DoS attack as TCP xmasscan.
tcp_synfin - Specify the type of DoS attack as TCP synfin.
tcp_syn_srcport_less_1024 - Specify the type of DoS attack as tcp_syn_srcport_less_1024.
ping_death_attack - Specify the type of DoS attack as ping_death_attack.
tcp_tiny_frag_attack - Specify the type of DoS attack as tcp_tiny_frag_attack.
all - Specify all types of DoS attack.
action - When the DoS prevention is enabled, the following action can be taken.
drop - Drop DoS attack packets.
state - Specify the DoS attack prevention state.
enable - Enable the DoS attack prevention.
disable - Disable the DoS attack prevention.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure land attack and blat attack prevention, the action is drop:

Table of Contents

Other manuals for D-Link xStack DGS-3120 Series

Related product manuals