D-Link xStack DGS-3120 Series - Show Snmp Community

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
964
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a SNMP community “System”:
DGS-3120-24TC:admin# delete snmp community System
Command: delete snmp community System
Success.
DGS-3120-24TC:admin#
101-4 show snmp community
Description
This command is used to display the community string configurations.
Format
show snmp community <community_string 32>
Parameters
<community_string 32> - (Optional) Specify the Community string.
If not specify community string , all community string information will be displayed.
Restrictions
None.
Example
To display SNMP community:
DGS-3120-24TC:admin# show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
------------------------------- ---------------------- ------------
private CommunityView read_write
public CommunityView read_only
Total Entries : 2
DGS-3120-24TC:admin#